The Ultimate RV Skylight Guide – 11 Steps to RV Skylight Replacement – Read This Before Buying or Replacing

RV skylights are a great option in any RV, providing natural light to areas that can sometimes be dark and uninviting, but proper care and maintenance of RV skylights is extremely important.

One of the main areas you will see a skylight, in an RV, is in the shower area. Even though most RV showers are equipped with traditional lights, an RV shower skylight gives you a more natural light. And we all know that conserving water in your RV is more pleasant in natural light!

www.EZTopsWorldwide.com
www.EZTopsWorldwide.com

Like every other part of your RV, the RV skylight will require some maintenance to keep it in proper working order. A frequent visual inspection, along with an annual resealing, will go a long way toward helping you maximize the life of your RV skylight.

FREE Subscription
RV Magazine

GET IT NOW No Credit Card Required

An RV skylight effectively consists of two pieces. On the inside of your RV there is an inner liner. The inner liner consists of a clear cover, allowing that great natural light into your shower. It also includes a plastic frame that is screwed into the ceiling . On the outside of the RV, screwed into and sealed to the roof, is the RV skylight dome.

As seen on CNN, New York Times, and CNBC: Find out how much money you can make renting your RV Click Here

Because the RV skylight consists of two separate pieces, different care and maintenance should be observed.

The interior liner of your RV skylight should be checked often for normal wear and tear. Because the RV shower skylight is in an area that can be damp and humid, keep the interior liner clean so that mildew doesn’t form.

GUIDE TO RV BOONDOCKING Download

Tell us where we can send you the guide

RV LIVING A STEP-BY-STEP GUIDE Download

Tell us where we can send you the guide

RVING TO ALASKA Download

Tell us where we can send you the guide

See More Free Guides

Additionally, be sure the edges of the frame of the liner are in good repair. It isn’t uncommon for the frame of the liner to crack around the screw holes, and if this happens, you’ll want to replace the liner and frame.

The RV skylight cover is on the roof, and like other parts of your RV roof, it needs to be checked one or two times per year.  Check the RV skylight dome itself for: cracks from age, flexing or the occasional tree branch in a campground. Also look for bubbles that may have formed in extreme conditions, which can also lead to cracks or leaks.

Additionally, it’s important to check the sealant around your skylight dome. Again, like other parts on the roof of your RV that get sealed, you’ll want to reseal the edges of your skylight dome. One or two times per year should be sufficient, depending on use and the conditions in which you use your RV.

Extreme temperatures, either hot or cold, can lead to the sealant wearing out more quickly. If the sealant begins to crack or tear, it can lead to leaks in a very short amount of time.

If your RV is older or you’ve spent a lot of time driving in areas with low hanging trees, it might be time for an RV skylight replacement. This is an easy do-it-yourself project that even a novice can undertake. But it’s important to pay attention to details while you’re doing it.

After all, you’re dealing with the roof, and the last thing any RV owner wants to worry about is roof leaks that lead to damage, before you know it. Those leaks are particularly painful if the damage was caused by your own error, and not paying attention to detail.

Once you’ve determined that you need an RV skylight replacement dome, the first thing you’ll want to do is to measure the existing skylight dome. Pay particular attention to the size of the dome itself, and the width of the flange where the screws fasten the dome to the roof.

Next you’ll need to find a replacement.  Your local RV parts and service center should carry replacement domes, or you may find more variety by checking online.

If your RV is older, you may have trouble finding a replacement that is the same size as your current RV skylight cover. Don’t be alarmed by this! It’s okay to choose an RV skylight dome that is a different size than your original, but as you can imagine, it has to be larger.

There are two very important things to consider when choosing a replacement. First, make sure that the dome covers the entire skylight opening. Second, make sure the flange of the new dome is as wide, or wider, than the original. It is important that the flange at least covers the original screw holes.

Now, let’s get that RV skylight dome replaced!

11 Steps to RV Skylight Replacement

  1. D&H RV and Trailer Repair - www.dnhrv.com
    D&H RV and Trailer Repair – www.dnhrv.com

    Make sure you have the right sealant. Once you have acquired a replacement dome, read the instructions to find out what type of sealant the manufacturer suggests.

  1. Use a putty knife to scrape away old sealant. Using a putty knife, making sure not to damage your roof. Scrape away the old sealant, so that you can access each of the screws in the original RV skylight dome.
  1. Remove the original screws. Now that you have access to them, remove them! Assuming that the original screws are the self-tapping kind, you’re going to reuse them. Be sure to inspect the screws to make sure that they aren’t damaged or rusted, and keep any that are still useable.
  1. Remove the old RV skylight dome. Use your putty knife to pry between the old dome and the roof, loosening the dome a little at a time, until you can pull the dome away from the roof completely. Again, be careful not to damage your roof. If your RV has a rubber roof, be especially careful not to rip the roofing material.
  1. Scrape away any remaining sealant. Use your putty knife to scrape away any of the old sealant that is still on the roof, after removing the dome. You can use Mineral Spirits and an old rag to get more of the sealant off. (Be careful of using Mineral Spirits if you have a rubber roof.) Get as much of the old sealant off of your roof as possible, but don’t worry about getting every last bit of it as you’ll be using new sealant to cover it as well.
  1. Cover original screw holes with a bead of manufacturer’s recommended sealant. Next you’re going to put some new sealant on your roof. Again, be sure you use a sealant recommended by the manufacturer. Run a thick, single bead of sealant around the opening for the skylight, making sure to cover up each of the original screw holes. The new RV skylight dome may not have the same screw hole pattern as your original. That’s okay! You’re sealing the old holes with the new sealant and will create new holes where needed.
  1. Dry fit your RV skylight replacement. Take your new RV skylight and place it on top of the bead of sealant you just laid over the screw holes. Wiggle the replacement dome back and forth, to flatten out and spread the sealant and create a bond between the new dome and your roof. Center the skylight over the opening in your roof.
  1. Use self-tapping screws to fasten your RV skylight replacement. Remember that the new holes may not match the old holes, and that is okay. Self-tapping screws will create new holes to attach to your roof. It’s possible that your new skylight dome will have more holes in it than your original dome, so you may need extra screws for the job. Tighten each of the screws, until they just begin to flex the plastic of the new dome. Do not over tighten the screws or you may find yourself having to replace your brand new skylight replacement. While doing this, if you see some of the sealant coming out of the sides of the dome or through the screw holes, that’s okay.
  1. Run a bead of sealant around the edge of your new skylight. Use sealant around the edge of the skylight to create another barrier between water and the inside of your RV.

    D&H RV and Trailer Repair - www.dnhrv.com
    D&H RV and Trailer Repair – www.dnhrv.com
  1. Cover each of the screw heads with sealant. Use your sealant to cover up the heads of each of the screws that you have used to fasten your new RV skylight.
  1. Let the sealant dry, then check for any trouble spots. As the sealant dries it may shrink up slightly, so you’ll want to check the skylight again after a few hours. If there are any areas that look like they could use another bead or covering of sealant, cover them now.

The last step is continuing good maintenance habits. Be sure to check your RV skylight, along with all areas of your RV roof, a few times each year. Wear and tear, or trouble spots where sealant may have become worn, cracked or brittle, will become problem areas in a hurry.

With proper maintenance, your RV skylight will provide you with years of enjoyment!

See How Much You Can Make Renting Your RV
  • Select Your RV Type Below

What do you think?